20B Single Turbo FD
Autotech Motorsports LCC has transplanted a 20B, with single turbo,
into a 1995 RX-7. A 20B conversion has been done before. However what
makes Autotech Motorsports LLC conversion unique is as follows:
The steering column
and rack stays in place. No bump steer.
The engine sits 3-4
inches lower. Even lower than the stock engine.
The engine sits 6-7
inches backward into the transmission tunnel.
No cutting of the
firewall was involve.
The shifter virtually
stays in its stock location.
Pictures
|
The engine sits lower than stock. The 20B
engine has been fully disassembled, blue printed, ported and
rebuild with Iannetti ceramic seals. |
|
|
|
Here's the shot of the new custom subframe.
No bump steer on this conversion. |
|
Shifter location is virtually same as stock. |
|
Video
The sound of the 20B motor reving can be
pleasant to the ear. Here's some video shots taken from this car.
|
This is an engine bay shot where the motor is being rev. Notice
how low and inward that motor setup. (3.8MB) |
|
|
|
That sweet 20B roar right at the exhaust.
(1.77MB) |
|
